In this segment of the video, the host provides a step-by-step demonstration of how to properly mask off spokes and tires to prevent overspray while repairing alloy wheels. The initial focus is on preparing the wheel surface by removing any tire slick or shine. This ensures proper adhesion of the masking tape. The host emphasizes the importance of thorough sanding using different grit sandpaper to feather out curb damage and create a smooth painting surface. After sanding, the area is cleaned, and gray scotch is applied to enhance surface keying for improved paint adhesion.
The video then transitions to the masking process, where the host highlights the significance of creating a soft edge with the masking tape for a seamless spray application. Additionally, the use of a heat source is recommended to enhance paint adherence to the alloy wheel surface.
Moving on to the painting phase, the host demonstrates the application of the base coat, followed by a quick flash-off with a heat gun. Two coats of lacquer are then applied using a spray gun, although alternatives like rattle cans or aerosols can also be utilized. The crucial step of removing backmasking is shown to avoid leaving a hard edge, contributing to a professional finish.
Remarkably, the entire wheel repair process is completed in under 10 minutes, showcasing the efficiency of the demonstrated technique. The host concludes by highlighting the customer’s satisfaction with the results, providing viewers with valuable insights into achieving a successful alloy wheel repair.
.
