According to a recent study, over 50% of all reported car damage is from keying or scratched paint. Scratches in the paint create a visual irritation but can also lead to premature rusting of the vehicle. For many, scratches go unfixed because of the cost associated with having the paint touched up. What many may not realize is that touching up the paint on a vehicle can be done at home.
You can buy touch up paint for Toyota, Ford, Dodge, and Chevrolet so that it perfectly matches the paint already on the vehicle. Scratches are classified based on the depth of the scratch. The clear coat that is applied over top of the paint is usually between 1.5 and 2 ml thick.
When a scratch is very shallow, it may only impact the clear coat. When this happens, the scratches can actually be buffed out. This means you do not have to buy touch up paint. If you wax and buff the car and the scratch is still visible, that means it is into the paint.
You have to buy your paint through a specialized dealer in order to guarantee the colors match. For example, red touch up paint for Toyota is different than red Dodge touch up paint. Each company has their own unique blend and it is essential to get the right blend.
Some car owners may be nervous about buying touch paint and doing it themselves. However, there is really no harm. If it does not look good, the cost of having it touched up professionally will be essentially the same as it would have been to have it done in the first place. By trying it yourself, the only thing you are risking is getting it done right for a fraction of the cost.
You can also buy a touch up paint kit that will include the supplies needed to get the job done. Your kit can include touch up paint for Toyota or any other brand you need. One of the most important aspects is ensuring the entire area stays clean before, during,and after touching up the paint. Dirt or debris that gets into the paint or clear coat while it dries will be highly noticeable when the job is done.
The second thing you want to remember is to have everything you need before you get started. This isn’t the type of project that you can easily start and stop and still have it turn out great in the end. You need to have everything ready to go and then focus on what you redoing until the job is done for the best results.